Fire Extinguishers in an ANSI Park Model

sinter4911 · Post by **sinter4911** » Wed Oct 05, 2011 8:44 am

Does an ANSI (Under 400 Sq.FT.) Park Model have to have a fire extinguisher put in by the Manufacturer?

David Oxhandler · Post by **David Oxhandler** » Wed Oct 05, 2011 3:55 pm

Good question. Our concentration here is on HUD code homes. YOu can to start searching for an authoritive answer at http://global.ihs.com/news/temp/standards/ANSI.html

thanks for visiting us online

fredcdobbs · Post by **fredcdobbs** » Thu Oct 06, 2011 7:13 am

Yes, ANSI A119.5 3-4.1, for Park Model info go to RPTIA web site http://www.rptia.com/

sinter4911 · Post by **sinter4911** » Thu Oct 06, 2011 10:45 am

Thank you for your Replies.

I did contact the RPTIA and they said any Park Model home built by the ANSI Building Code must have a Fire Extinquisher installed by the Manufacturer. They also faxed me a copy of the page from their code book showing it.

Thanks Again

The Manufactured Housing Forums

Fire Extinguishers in an ANSI Park Model

Fire Extinguishers in an ANSI Park Model

Re: Fire Extinguishers in an ANSI Park Model

Re: Fire Extinguishers in an ANSI Park Model

Re: Fire Extinguishers in an ANSI Park Model

Who is online