Bath reno. questions

The central location on the web for the owners of manufactured homes to share their experiences.
Post Reply
Tia

Bath reno. questions

Post by Tia » Mon Apr 14, 2003 8:49 pm

Boy am I glad I typed this site in!

Alright, I want to COMPLETELY renovate my bathroom!
We can do this mostly ourselves, well, neither of us have ever done it before but we are intelligent and creative individuals...

The bathroom is very large, it had been enlarged by the previous owner, who was obviously a complete idiot (he has made a mess of most of this place). He moved the one wall over (to enlarge it) and then moved the sink back and didn't do anything with pipes etc. everything is showing along the floor (very ugly) AND he did not move the water tank over, so there is a huge sqaure behind the water heater that is just collecting dust (behind the wall) and a teensy-weensy tub...

Anyhow, basically it's a complete mess and I want to rip everything out and re-do it (not the pipes, I'll figure a way to cover them).
My problem - Money, or, lack there of. So, I am not able to do everything at once but figure I can buy bits and pieces over time and then put it all together but still need cheap materials - Anyone in British Columbia know of a good place to do this? What about used materials - where can I find them?

Can we tear out the existing tub, the wall between it and the water heater, move the heater back and put in a corner tub on the opposite end (or whatever tub we decide on/think- square bathroom) without any problems?
The wall I want to remove is just the size of the width of the tub.

And, on average, in CAD, how much should I expect to spend on such a project? The very lowest amount plausible...
I am going to use linoleum for the tub/shower wall - I found this trick from a friend who did it in her kitchen :-) Linoleum for the floor, drywall to replace the panels, a new toilet (and tub, of course) preferably a new water heater (as big as I can get as there are 6 people living here) going to paint the walls, no tiles. I'm not sure yet if I want a free standing or counter sink, I am thinking I will go for the free standing type, though and just add in or build counters ourselves later. I want it to be cheap but nice enough that it won't be a hassle if/when I decide to sell later on in life. I realize I can probably start off and have a finished job really cheap, then add things later (like tiles, fancy faucets and stuff).

We figure we will need a plumber to re situate the water heater...unless someone here can give me info about how to do that?

I am a social person also, so if you're in the Okanagan B.C. area and are renovating or know someone who is, let me know - maybe we could collaborate?

Thanks for listening, any help grately appreciated.
-Tia

Tia

Re: Bath reno. questions

Post by Tia » Mon Apr 14, 2003 8:55 pm

Oh, I should add that the water heater is currently directly behind the wall next to the tub (faucet side) so, the way I want to change it, taking that wall out and moving the heater back and tub faucets to another wall will require a lot of new pipes etc...ok, so probably I will have to bring in a plumber to do all that work - so, about how much would that cost me?

-Tia

Mac

Re: Bath reno. questions

Post by Mac » Tue Apr 15, 2003 1:23 pm

$38.95. I wouldn't use linoleum for the tub/shower wall, instead I'd use fiberglass-reinforced plastic. Another site you ought to visit is www.mobilehomerepair.com.

rmurray

Re: Bath reno. questions

Post by rmurray » Wed Apr 16, 2003 7:10 am

I cannot be much help...but there are many sites on the net that might..(cut and paste URLs)
Try
Do It Yourself Network at http://www.diynet.com/

Do It Yourself . com ..This site has a large forum specifically for manufactured homes

http://forum.doityourself.com/index.php

DoItYourself has an extensive plumbing tip section at

http://www.doityourself.com/plumbing/

Then...if you have a little time..and a little humor try

This Ol Trailor Online at

http://www.thisoltrailer.com/index.html

Of course there is the old standby www.mobilehomerepair.com

Tia

Re: Bath reno. questions

Post by Tia » Thu Apr 17, 2003 11:07 am

Thank you for the links, I'll check those out!

Why not lino? It's cheap and it works and it's EASY to clean :-)

What is the $38.95 about?

Mac

Re: Bath reno. questions

Post by Mac » Thu Apr 17, 2003 3:58 pm

I was teasing you! I made a shower enclosure from one of those garden tubs, by gluing the fiberglass-plastic panels on the wall. I worry about sealing any seams that linoleum might have, and any possible water penetration into the wall. Old shower stalls used to be made of linoleum, in the older homes that were designed to last ten years or so. :) mac

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests