The Manufactured Housing Forums

I own a 1968 Great Lakes doublewide. I purchased it as an extension of a longterm rental agreement.The aluminum wiring has become an increasing concern of mine. Is there anything that can be done about it? to replace it?and if there is a positive answer to all of this, who does this type of work? and at what cost/expense?
Hellp!
Jim

I'd suggest that, unless you are experiencing problems with the wiring, leave it alone, and carry insurance.

Completely replacing the electrical system will be expensive, and because of the extensive work involved, would require it to be brought up to current code as well.

Without knowing the specifics, I'd say you are *easily* looking at over $5000 to do a complete rewire (in other words, more than the home is worth).

One of the downfalls of aluminum wiring is that it expands and contracts much greater than copper wiring. This leads to loose connections. One thing you could do is check and tighten the connections on all the outlets and other fixtures. Doing that may solve some of your problems.

Mark
You gotta see my repair manual!

Aluminum wiring itself is not a problem, it's completely acceptable. But - be ABSOLUTELY CERTAIN that all devices and fixtures are rated for aluminum wire. If not, the connections will corrode and heat up, becoming very dangerous. Most devices today are rated for use with both copper & aluminum wire.