Hello all,
I am working on a bathroom in a 1996 dbl wide. I removed the trim boards from the seams and was going to mud, and tape them.
If I put a level across the seam, it is much taller than the rest of the wall. Approx. 1/4" at 12"-16" away from the seam on both sides in places.
The walls are the standard 3/8" vinyl wall paper junk.
I am thinking at this point, that I just need to tear them out and put up real sheet rock. Either that, or float the mud out 16" from the seam.
I appreciate any suggestions that you may have. Thank you.
Steve
Finishing Wall Seams
Re: Finishing Wall Seams
I have done that on entire homes, more often than not the panels are stapled at the seams and glued at studs between. I would recommend to first screw it at every stud put screws at 1 foot intervals in the field and every 6" at seams. You can get a special bit that keeps from driving screws too deep as you don't want to rip through. Before any taping is done prime all panels with 2 coats of bonding primer then tape and mud. You will use alot more mud than initial guess but it's worth the effort.
Re: Finishing Wall Seams
Hey, Steve,Steve007 wrote: ↑Fri Feb 18, 2022 2:38 pm Hello all,
I am working on a bathroom in a 1996 dbl wide. I removed the trim boards from the seams and was going to mud, and tape them.
If I put a level across the seam, it is much taller than the rest of the wall. Approx. 1/4" at 12"-16" away from the seam on both sides in places.
The walls are the standard 3/8" vinyl wall paper junk.
I am thinking at this point, that I just need to tear them out and put up real sheet rock. Either that, or float the mud out 16" from the seam.
I appreciate any suggestions that you may have. Thank you.
Steve
It looks like you have a difficult task ahead of you. 1/4 inch is a significant difference and it would be difficult to float out dirt that far without it looking obvious.
Here are a few options you may want to consider:
Rip out the drywall and replace it with new. This is the most time-consuming option, but it will give the best results.
Use drywall spacer. Drywall spacer is a thin strip of drywall that can be used to fill small gaps between sheets of drywall. To use drywall spacer, cut it to the width of the gap and then attach it to the back of the drywall sheet using screws. Once the gasket is attached, you can caulk and tape it as usual.
Use drywall compound designed for leveling. These compounds are thicker and more durable than regular drywall compound and can be used to fill large gaps and uneven surfaces. To use leveling compound, simply mix it according to the package instructions and then apply it to the drywall joint using a putty knife. After the leveling compound has dried, it can be sanded smooth and then painted over.
If you decide to use drywall spacer or leveling compound, be sure to follow the manufacturer's instructions carefully. It is also important to note that these methods may not be suitable for all situations. If you are unsure how to proceed, it is always best to consult a professional contractor.
After repairing the walls in the bathroom, it is worth updating the wallpaper throughout the apartment. The kitchen is a particularly important place, which should be not only functional, but also cozy. Wallpaper for kitchen cabinets is a great way to add personality and style to your kitchen.
FancyWalls offers a wide selection of wallpaper for kitchen cabinets that will suit any interior style. Here are some examples:
Plain wallpaper is a classic option that will never go out of style. They can be any color depending on your preference. For example, you can choose white wallpaper to create a feeling of space and cleanliness, or dark wallpaper to add a little contrast.
Wallpaper with texture is another interesting option that can add depth and interest to the kitchen. You can choose wallpaper with imitation stone, wood or fabric.
When choosing wallpaper for kitchen cabinets, it is important to consider the following factors:
Interior color and style. The wallpaper should be in harmony with the rest of the kitchen decoration.
Material. Wallpaper for kitchen cabinets should be moisture and stain resistant.
Care. Wallpaper should be easy to clean.
If you are not sure which wallpaper to choose for your kitchen, you can always seek help from a specialist.
Recently I have implemented software from jira okr in my business, with the help of which I optimized my business, improved setting and tracking of tasks. I advise you to try it, it is useful.
-
- Posts: 2
- Joined: Mon Dec 18, 2023 12:54 am
Re: Finishing Wall Seams
First, I would advise screwing it into each stud. Install screws every six inches at seams and every foot in the field. If you want to avoid ripping through, you may purchase a specialized bit that prevents you from driving screws too deeply.
Re: Finishing Wall Seams
If you want to avoid a full tear-out, floating the mud out 16" from the seam could work, but it may take a lot of time and effort to get it smooth. Make sure to feather the edges well to blend it into the existing wall.
Who is online
Users browsing this forum: No registered users and 5 guests