Need a Drill Bit Recommendation

Ask our experienced MH repair and renovation experts about your home repair needs!
Post Reply
Ndarennin
Posts: 1
Joined: Wed Nov 27, 2019 3:51 am
Location: Wilmington

Need a Drill Bit Recommendation

Post by Ndarennin » Wed Nov 27, 2019 7:48 am

Have two parts held together with a roll pin. The roll pin would not come out, figured I would just drill the hole larger (9/64") and make the roll pin disappear in the process, separate the parts and then get a larger roll pin fro reassembly. Problem the one part is cast iron and the other is hardened steel and it is just laughing at my drill bits. I need a recommendation for a good quality drill bit that can cut through this stuff.

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests