Bath tub panels

[Elizabeth]

Hello, my name is Elizabeth I live in California and am trying to redo the bathtub panels in our master bathroon. Are size is 60"x42" and we are having a heck of a time locating this size. We redid the spare bathroom which was smaller and purchased a panel kit from a local hardware store. But they can not find this size. Do you know where in Northern California we could purchase one. Thank you very much.

[Mac]

One idea might be to use the commercial FRP (fiberglass-reinforced-plastic) sheets, cut to size. We did this with our master bath on our previous house, and it worked quite well.

[David Oxhandler]

Have you tried the MH PARTS STORE?&#160 If you dont find what you need on the web site, friendly & knowledgeable customer service representatives are available to answer your questions or take your special order. Call them at the toll free number you will find at the top of the Parts Store pages

[Roy T. Bonney]

60" is the standard tub used in all stick built housing, as well as your particular manufactured home. The 42" for the width of the garden tub can be obtained in a couple of ways. There is a one piece available, there are also standard 3 piece tub surrounds that then utilize corner shelf units to bring them out to the 42" you require. The three piece is available at any home center with the corners.