size
Re: size
There was a Bonnavilla model by Chief industries in both singles and double sections...I think you could use this for your purposes...
The size...all you have to do is get a tape measure and measure it...
The serial number does not look like it has all the number...I would be stamped into the cross member on the hitch end of the home....Good Luck
The size...all you have to do is get a tape measure and measure it...
The serial number does not look like it has all the number...I would be stamped into the cross member on the hitch end of the home....Good Luck
Re: size
Delbert,
You have a great home that's manufactured by Chief Industries in Aurora, Nebraska. BonnaVillla Homes is their product name, their should be a serial number stamped on the right side of the front frame, should have over 8 numbers and the size of the home and year of the home. If you want more information contact BonnaVilla homes and they have the engineering drawing stored there also. You also could look in the untility room, electrical door, masterbedroom closet and you should see a 8"x12" compliance certificate glued to thewall and it should give you date the home was manufactured, size of the home, what zone it was constructed for. Good luck!
You have a great home that's manufactured by Chief Industries in Aurora, Nebraska. BonnaVillla Homes is their product name, their should be a serial number stamped on the right side of the front frame, should have over 8 numbers and the size of the home and year of the home. If you want more information contact BonnaVilla homes and they have the engineering drawing stored there also. You also could look in the untility room, electrical door, masterbedroom closet and you should see a 8"x12" compliance certificate glued to thewall and it should give you date the home was manufactured, size of the home, what zone it was constructed for. Good luck!
Who is online
Users browsing this forum: No registered users and 12 guests