Marco fireplace problems

What do you want to know about manufactured homes? The worlds greatest collection of expert advice on buying, installing, maintaining and repairing manufactured homes.



Post Reply
jwsland
Posts: 1
Joined: Wed Dec 29, 2010 1:45 pm

Marco fireplace problems

Post by jwsland » Thu Dec 30, 2010 3:59 am

Hello, I recently moved into my girlfriends house which has a Marco fireplace model number 792778d. We enjoy using it, unfortunately we aren't getting any heating benefit from it . The fireplace has a blower on it installed with an on off switch, no thermostat. It hardly blows any air at all when on. I just kicks some annoying ash around. Every different option on this fireplace is pretty much useless. Open doors give off some heat but once the fire is out, or dying down then all our heat goes with it, up the flu. When we close the doors and turn the blower on the logs burn noticeably longer but the blower isn't pushing the heat out. There is a lever on the side which allows outside air to be drawn into the back area where the air should be moving from the fans vs. using only inside air, we can't tell the difference between open or closed. I have taken the front apart and checked the fans, they seem to be working just fine. They blow strong when I put my hand infront of them. I had no luck when googling this issue. Marco fireplaces has gone out of business. Any ideas, thoughts or suggestions?

David Oxhandler
Posts: 1459
Joined: Tue Oct 02, 2007 8:37 am

Re: Marco fireplace problems

Post by David Oxhandler » Thu Dec 30, 2010 7:27 am

Marco went out of business some years ago . Fireplaceguys.com were dealers and have been offering replacement panels and parts for Marco fireplaces. They would be best equipped to answer your question. They have a help line and offer Help For The Do It Your Self Homeowner at 503 667-2063

Please let us know if they were able to help.
David Oxhandler
[email protected]

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests