Hi,
I'm considering purchasing a Dutch Milennium Model #160-31. Does anyone currently own something from the Dutch Millennium series and what are your opinions?
Thanks in advance for any help. This is a big decision!
Cheers,
Michelle
Dutch Millenium Series
Re: Dutch Millenium Series
Sorry to follow-up my own message, but just thought I pass on more info.
First off, it's Dutch Model 1680-31 - I forgot the 8 in my previous post. It's a 16X80 singlewide.
My problem is that I LOVE the way it looks. Gorgeous master bath, fireplace, sunken kitchen, skylights, etc. However, I also want to make sure that it's structurally sound. Here are a few details:
7 1/2 foot sidewalls
Recessed frame
crossmembers/outriggers pm every 4' on steel undercarriage
2 X 6 (14') or 2X8 (16') floor joist 16" OC
Full length wall studs
5/8" floor decking
30 lb. PSF roof load
water resistant underlayment
nominal 3/12 roof pitch
3/8" exterior blackboard
2 X 6 facia backer
aluminum facia
vented eaves all around
double 4 Dutch Lap Vinyl siding w/metal starter strip.
all copper wiring
brass plumbing fittings
water shut offs throughout
Comments as to whether the above are good/bad? Is there anything else I should ask the dealer about?
Thanks again for any help.
First off, it's Dutch Model 1680-31 - I forgot the 8 in my previous post. It's a 16X80 singlewide.
My problem is that I LOVE the way it looks. Gorgeous master bath, fireplace, sunken kitchen, skylights, etc. However, I also want to make sure that it's structurally sound. Here are a few details:
7 1/2 foot sidewalls
Recessed frame
crossmembers/outriggers pm every 4' on steel undercarriage
2 X 6 (14') or 2X8 (16') floor joist 16" OC
Full length wall studs
5/8" floor decking
30 lb. PSF roof load
water resistant underlayment
nominal 3/12 roof pitch
3/8" exterior blackboard
2 X 6 facia backer
aluminum facia
vented eaves all around
double 4 Dutch Lap Vinyl siding w/metal starter strip.
all copper wiring
brass plumbing fittings
water shut offs throughout
Comments as to whether the above are good/bad? Is there anything else I should ask the dealer about?
Thanks again for any help.
Re: Dutch Millenium Series
I'd try to upgrade the 3/8 inch blackboard for 1/2 osb or better.
Joe
Joe
Re: Dutch Millenium Series
Hi again,
Thanks a lot for your response. I'm actually looking to buy the display model at a discount so I don't think anything can be changed.
Can you explain what the blackboard is? Is this something that could cause major problems if not upgraded?
Thanks in advance.
Thanks a lot for your response. I'm actually looking to buy the display model at a discount so I don't think anything can be changed.
Can you explain what the blackboard is? Is this something that could cause major problems if not upgraded?
Thanks in advance.
Who is online
Users browsing this forum: No registered users and 10 guests